Product Categories
  Industrial Wireless
  Hardened Optical Networks
  Broadband Power Line
  Professional Services
  Switches & Converters
  Professional Services
  Repair / Return (RMA)

MDS iNET-II - Secure IP/Ethernet Networking

Pub #TitleRevision DateFormat
05-2873A01-GMDS iNET / iNET-II Startup Guide11/06/2014 [157k]
MDS iNET 900 Installation/Startup Guide. Deals specifically with installing the product and initial setup. A larger Reference Manual (Part No. 05-2806A01) is also available for this product.
05-2806A01-LMDS iNET / iNET-II Reference Manual (for use with firmware 4.x or earlier)11/06/2014 [5.6M]
Complete installation & operating instructions for the MDS iNET 900 Wireless IP/Ethernet Transceiver. A small installation booklet is also available for this product (see P/N 05-2873A01).
4131A-iNET_ENIENI Supplement for iNET07/31/2009 [1.6M]
Supplemental information to standard iNET manual (05-2806A01). Only required for iNET/ENI applications of the product.
05-4554A01-AMDS iNET 300 (300 MHz version)03/14/2007 [723k]
Installation & Startup instructions for the MDS iNET 300 Transceiver.
05-4658A01-CMDS iNET 900 Hardware/firmware compatibility notice01/21/2011 [17k]
Notice for iNET 900 radios explaining minimum version of firmware code required for specific serial number ranges.
05-4057A01-CMDS iNET-II Firmware compatibility notice05/01/2010 [17k]
Notice for iNET-II radios explaining minimum version of firmware code required for specific serial number ranges.
05-3496A01Software/Firmware Installation Guide04/19/2010 [12k]
Instructions for installing new software/firmware files in GE MDS radios
05-2258A01-FWiring instructions for transceiver power cables used with External Converters01/19/2010 [57k]
05-2806A01-KMDS iNET Series Transceivers (Rev. K)04/08/2014 [5.6M]
Complete installation, configuration & operating instructions for MDS iNET Series Transceivers. Covers MDS iNET and iNET-II radios.
05-6192A01-ABattery Disposal Notice10/25/2013 [103k]
05-4161A01-DMDS Protected Network Station (P21, P22, P23, SDxP)09/20/2010 [2.2M]
Installation and operating instructions for the MDS Protected Network Station. This is a redundant station consisting of two transceivers, two power supplies, and a switchover logic board to automatically select between transceiver A or B as the active unit. It can contain several types of transceivers, including MDS iNET (P21), entraNET (P22), Mercury (P23), and SD (SDxP).


Would you like us to contact you regarding
MDS iNET-II - Secure IP/Ethernet Networking?