Oslo, NORWAY, February 23, 2021 – Norway’s transmission grid operator Statnett announced it will install the world’s first 420 kilovolt (kV) 63 kiloampere (kA) GE Green Gas for Grid (g3) gas-insulated line (GIL) and busbars (GIB) operating at -30°C within its new 420 kV Hamang substation located in Oslo’s Sandvika area.
That makes Norway the eighth country in Europe to adopt g3 (pronounced “g-cubed”) technology, a game-changing alternative to sulphur hexafluoride (SF6), an insulating and switching gas traditionally used in high-voltage substation equipment. Identified as the world’s most potent greenhouse gas by the 1997 Kyoto Protocol, SF6 is estimated to contribute 23,500 times more emissions than CO₂, if leaked, and can remain in the atmosphere for up to 3,200 years.
“As a responsible grid operator, we are determined to play our part in reducing our greenhouse gas emissions. Emissions of SF6 gas are Statnett's largest source of direct greenhouse gas emissions. Even though Statnett closely monitors SF6 switchgear with advanced monitoring, natural leaks from these plants are today’s single source of emissions from the company's operations, that has the greatest harmful effect on the climate,” said Guilhem Blanchet, responsible for GIS technology at Statnett. “Our goal is to reduce our emissions by 25 percent in 2025. The use of GE’s g3 technology for our new 420 kV Hamang GIS substation, a key substation in the upgrade of the transmission network in and around Oslo, is an important step in supporting this goal.”
“g3 is part of GE’s broader efforts to help the electric transmission and distribution industry reduce its greenhouse gas emissions. Together, Statnett and 21 other utilities in Europe are avoiding the addition of more than a million tons of CO₂ equivalent to the grid by deploying g3. That’s the equivalent of removing about 476,000 petrol cars from the road for one year,” said Bertrand Portal, g3 Product Manager at GE’s Grid Solutions.
Gas-insulated line installations from eight major European electrical utilities account for two-thirds of this reduction. Statnett alone is expected to avoid the installation of an additional 24,000 tons of CO₂ equivalent to the Norwegian grid.
g3 has been identified as an alternative to SF6 for use in high-voltage equipment in a report published by Norway’s Water Resources and Energy Directorate (NVE) in October 2019. This was confirmed by the EU Commission in a similar report published in September 2020, which concluded there are cost-effective, technically feasible and energy efficient alternatives to SF6. The EU also highlighted that g3, unlike any other SF6 alternatives, is the solution when space is a constraint as g3 products feature the same compactness and performance as traditional SF6 equipment.
g3 products also have a greatly reduced impact on the environment over their lifetime compared with other solutions, according to life-cycle assessments (LCAs), based on international ISO 14040/14044 standards.
To further support Norway’s move to SF6 alternatives, GE’s Grid Solutions will participate in Norway’s independent Research Institute’s Sintef study on alternative gases.
GE’s game-changing g3 technology is a culmination of a decade of research and development by its teams in France, Germany and Switzerland in collaboration with 3M Company. g3 products are available for live-tank circuit-breaker and gas-insulated substations (GIS) up to 145 kV and gas-insulated lines (GIL) up to 420 kV. A g3 420 kV gas-insulated substation circuit-breaker is under development with financial support from the EU as part of its LIFE Programme.
To learn more about GE’s high-voltage g3 substation equipment, visit GE’s website or explore its interactive application here.
For information about GE’s EU-funded LifeGRID project, click here. For details about the EU’s LIFE Program and the g³ circuit-breaker project LIFE18 CCM/FR/001096 LIFE GRID, click here.
