| HEA Multicontact Auxiliary Relay |
 |
 |
The Type HEA high-speed multicontact, auxiliary relays are applicable where it is desired that a number of operations be performed simultaneously from the operation of a single relay.
- Electrically separate outputs
- Various shaft lengths available
- Contact multiplication
 More Info Buy Now / Selector |
 |
| HSA Multicontact Hand Reset Auxiliary Relay |
|
 |
The type HSA high-speed multicontact, auxiliary relays are applicable where it is desired that a number of operations be performed simultaneously from the operation of a single relay.
- Electrically separate outputs
- Universal target dropping
- Mechanical target
- High seismic capability
More Info Buy Now / Selector |
|
| Series 95 Lockout Relays |
|
 |
High-speed multi-contact auxiliary relays
used to simultaneously perform a number of
operations from a single relay operation.
- Heavy industrial construction
- Rotary / Double wiping knife blade design
- 600 VAC, 30 amp continuous
- Available with illuminated nameplates
- SCADA ready
- UL / cUL recognized
Typically used in low & medium voltage switchgear,
MCC’s, and relay and control panels
More Info |
|
| Ground Fault Systems |
|
 |
Equipment Protection
Service entrance application (BGFL)
Motor protection (GFM, GFA)
Complete relay and sensor packages
More Info Buy Now |
|
| Voltage Relays |
|
 |
Line of voltage relays to monitor three phase systems. Models available to detect loss of phase, phase unbalance, phase sequence, & over and under voltage.
More Info Buy Now |
|
| Current Transducers |
|
 |
Convert sinusoidal AC input to proportional DC output. Up to 600 amp AC input and 4-20 ma DC output.
More Info Buy Now |
|
| Open Circuit Protectors |
|
 |
Connect across CT secondary terminals to prevent inadvertent open circuit conditions. C100 to C800. Single and three element options available
More Info Buy Now |
|
| Capacitor Trip Devices |
|
 |
Provide a temporary source of energy for circuit breaker or switch trip coil operation during a loss of AC control power. Battery backup model available.
More Info Buy Now |
|
| ET-16/17 Indicating Lamps |
|
 |
The ET-16 (Incandescent) and ET-17 (Neon) indicating lamps are designed for application on switchboard panels up to and including 1/4-inch thickness. The lamps economize on space and permit easy replacement of bulb and resistor.
- Simple "push-twist" type plug
- GE extra-long-life bulbs
- Caps are available in various colors
More Info Buy Now |
|
| ET-16 Light Emitting Diodes |
|
 |
The ET-16 Light Emitting Diodes (LED's) are designed for application on control panels up to and including a 1/4 inch thickness. This assembly economizes on space and permits ease of replacement for bulbs and resistors.
More Info Buy Now |
|
| EB-1/2/4 Terminal Boards |
|
 |
The EB-1 is a one piece molded terminal board, equipped with binding screws for circuit wire connections and a white marking strip for circuit identification. The EB-2 includes clamp (pressure) type connectors for circuit wire connections. Both the EB-1 and EB-2 will accommodate wires up to and including Number 4.
More Info Buy Now |
|
| EB-25/26/27 Terminal Boards |
|
 |
The EB-25, -26, and -27 terminal blocks are molded one piece design available in 4, 6, and 12 points and are furnished with washer-less head binding screws (#10-32) for circuit wire connections. The blocks are supplied with a black marking strip with white numbers on one side, and white unmarked on the reverse side for circuit identification.
More Info Buy Now |
|
| IKU Terminal Blocks |
|
 |
Applications:
Control and power wire termination. Short circuiting versions for meter servicing, CT tap changing, etc.
Rating: 600 VAC, 50 A
Wire range: 18-10 AWG
More Info Buy Now |
|
| Pullout Fuse Blocks |
|
 |
Class J pullout blocks, available in two or three-fuse modes
More Info Buy Now |
| |
|
Power Sensing 
