The MultiLink ML1200 is a 9' panel mountable, hardened Managed Ethernet Switch designed specifically for use in Industrial Facilities, Substations and Transportation environments. It will supply you with reliable, high-speed networking of all your mission critical applications and provide flexibility and security with easy to use management functions that are unsurpassed in the industry.
Power-over-Ethernet option available (up to 8 PoE ports)
Power supplies available in 12VDC, 24VDC, 48VDC, 125VDC, and 250VDC. Optional AC/DC adapter also provides for connection to AC power sources
All common media types supported, including:
- 10/100 Base Copper (RJ45 Connector)
- 10BaseFL (ST Connector)
- 100BaseFX (ST, SC, LC, MTRJ Connectors)
- 1000BaseFX (SC or LC Connector)
- 1000Base Copper (RJ45)
Industrially Hardened
IEC 61850 Compliant for networking equipment used in utility substations
IEEE 1613 Compliant for Electric Power Substation communications equipment
NEBS Certified ensuring reliability of telecommunications networks in harsh environments
NEMA TS-2 rated for traffic control equipment
ETSI (European Telecommunications Standards Institute) certified to ensure conformance to operational standards under severe environmental influences
Available options for use in in Harsh Chemical Environment
Operating Temperature of –40°C to +85°C as per IEC 60028-2 without the use of fans
IP 40 compliant
Redundant power supply option available
UL Listed E156407
Superior Switch Management and Security
Network Management
SNMPv3 for secure configuration of switches
Web Management Interface for user-friendly configuration and monitoring
RSTP (802.1w) industry standard Rapid Spanning Tree Protocol
SMART RSTP (Ring Only Mode) for enhanced fast recovery of Ring Architecture Networks (<5ms/hop)
RMON for monitoring of network status & statistics
VLAN (802.1q) for segregating the network into smaller Virtual networks
QoS (802.1p) for prioritization of network traffic
Port Mirroring assisting network troubleshooting
IGMP Snooping enabling reductions in multicast traffic
SNTP for synchronizing the switch’s internal clock
SMTP providing Email notification of network problems
Event Logs creating a historical record of network events
Advanced Network Security
RADIUS and TACACS+ for remote access verification
SSL Web encryption preventing eavesdropping or tampering
Port Security disabling of data from unauthorized MAC addresses
IPv6 allowing for addressing a large number of devices)
Superior Switch Management and Security
Built for use in Utility, Industrial, and Security applications, the ML1200 has been designed for the unique needs of the Protection and Control Industry with a host of features that include: Link Loss Alert allows for recovery from broken fiber connection on a relay for both 10Mbit and 100Mbit applications SMART RSTP provides recovery of Ring Network Architectures in less than 5 milliseconds per switch (hop) Modbus Protocol Support enabling integrating Switch Data and Network Alarms into DCS and SCADA monitoring systems
Simple Switch Configuration and System Integration
The EnerVista software family allows for easy to use configuration, monitoring and integration of any MultiLink Managed Ethernet Switch Launchpad provides Document Management and Update Notification EnerVista Web Configuration Software allows for programming of all settings using a simple web browser Viewpoint Monitoring provides monitoring of all Switch Ports, and Alarming of network problems including
