Digital Energy Protection & Control Network Protection
Protection & Control Online Store
Protection & Control Support
Protection & Control Press Room
 
Network Stability and Control
 
Multilin C30 Controller System
The Multilin C30 controller system is a programmable logic controller for performing substation or bay automation that can also be used for expanding the I/O capability of protection devices and replacing Sequence of Event (SOE) recorders. The C30 provides fast deterministic execution of programmable logic with I/O capabilities far above an average protection relay.

More Info     Buy Now   
Multilin C60 Breaker Protection System
The Multilin C60 breaker protection system is a substation hardened controller that provides a complete integrated package for the protection, control, and monitoring of circuit breakers. The C60 supports dual-breaker busbar configurations such as breaker-and-a-half or ring bus arrangements. Signals from up to 4 sets of CT’s can be brought into the C60 for internal summation.

More Info     Buy Now   
Multilin C70 Capacitor Bank Protection & Control System
The Multilin C70 is an integrated protection, control, and monitoring device for shunt capacitor banks based on the well established and proven UR relay platform of GE Multilin. The C70 provides both the bank and system protection schemes for shunt capacitor bank protection. The current and voltage-based protection functions provide sensitive protection for grounded, ungrounded single, and parallel capacitor banks and banks with taps.

More Info     Buy Now   
Multilin P30 Synchrophasor Data Concentrator
The Multilin P30 PDC comes equipped with as many as 40 PMU inputs, up to 8 individually configurable C37.118 outputs and an incredibly fast recording capability of up to 120 frames per second. The built-in historian processor is capable of securely recording and archiving up to 100,000 values per second, sufficiently supporting the NERC PRC-002 standard.

More Info     Buy Now   
Multilin N60 Network Stability and Synchrophasor Measurement System
Load shedding, remedial action and special protection schemes. The N60 Network Stability and Synchrophasor Measurement System, a member of the UR Family of protection relays, is a flexible device intended for either the development of special protection schemes and/or serving synchrophasor data. The N60 delivers PMU data as per the latest version of the standard IEEE C37.118 (2011) with a sampling rate of up to 120Hz and supports multicast synchrophasors as per the newest IEC61850-90-5.

More Info     Buy Now   
MiCOM Agile P847 Phasor Measurement Unit
The P847 Phasor Measurement Unit forms part of GE’s system monitoring and control. The device is used to measure power system data in real time and report to the PDC (Phasor Data Concentrator) for visualization, data storage and most importantly for running a variety of ‘on line’ and ‘off line’ applications in systems analysis and control. The ultimate goal is to run the system economically and preserve system stability following major disturbances.

More Info
MultiSync 100 1588 GPS Clock – 1588 Time Synchronization
The MultiSync 100 1588 GPS Clock provides a complete 1588/C37.238 time synchronization solution for ML3000 Ethernet Switches, Universal Relays and the 8 Series Relay family. The GPS clock is compatible with IEEE 1588 version 2 implementation, including the C37.238 power profile, support for NTP, SNTP, IRIG-B, DFC77 and TTL time synchronization.  The MultiSync 100 1588 GPS Clock is compact in size (45 x 110 x 155 mm), has DIN-rail mounting  and is rated for -40 to 85 C temperatures.

More Info     Buy Now